|
|
|
Bottomcoat
Designed specifically for use on sail and power boats to provide good antifouling protection all season. |
|
|
Intertox
Intertox is a clear, penetrating wood preservative to protect wood from rot and fungal staining. |
|
|
Additives
For use with International products to create non slip surfaces or matt finishes. |
|
|
All Season Care
A range of boat cleaning and maintenance products from International. |
|
|
|
|
Danboline Bilge Paint
High opacity bilge paint with excellent coverage, ideal for bilges and engine bays. |
|
|
Epiglass HT9000
A versatile epoxy resin system suitable for a wide variety of uses on boats of all types. |
|
|
Fillers
No matter how well you treat your boat the very nature of it's environment means that damage will occur above and below the waterline. Use International's fillers to carry out those repairs too minor to warrant specialist attention. |
|
|
Goldspar - Conventional Varnish
Goldspar full-gloss polyurethane varnish is easy to use and quick drying. A hard varnish, it is abrasion resistant and UV resistant, and ideal for interior or exterior use. |
|
|
Interdeck
An excellent, easy to apply slip-resistant finish for decks. Interdeck contains a fine aggregate that will apply easily on all substrates. Interdeck gives a low sheen finish that helps protect against dazzle from sunlight reflected off decks. |
|
|
Interspeed Ultra Hard Antifouling
No longer just extra strong, a new, improved formula makes this superior antifouling ultra strong. Contains Teflon for a clean, slick hull. |
|
|
Interstrip
An antifouling stripper product formulated for removing antifouling from all substrates. Safe to use on glass fibre without harming the gelcoat. |
|
|
|
|
Micron Optima Eroding Antifouling
The ultimate performer in eroding antifoulings. Includes revolutionary activator and new resin system for unparalleled effectiveness over a full season. |
|
|
Original - Conventional Varnish
Original is a good general purpose yacht varnish suitable for interior and exterior use whatever the construction of your boat. |
|
|
Osmosis Treatment and Prevention
Osmosis is caused by a chemical reaction between water and unreacted substances remaining in the manufactured hull. Water breaches the exterior gelcoat and reacts with the chemical components creating acidic substances. These substances create pressure behind the gelcoat which causes blisters and eventually cracking. Once the gelcoat is breached in this manner, the underlying laminate is capable of absorbing water like a sponge. |
|
|
Perfection - High Performance Gloss
Perfection is a two pack high performance polyurethane gloss finish offering the ultimate in performance. UV filters in Perfection combine with the chemical cure to give the longest possible life. Perfection is available in a wide range of colours. |
|
|
Perfection - High Performance Varnish
High performance two pack polyurethane varnish. The ultimate product for durability, gloss retention and UV resistance with a very long life up to four times longer service life than ordinary varnishes. |
|
|
Perfection Undercoat
A high performance extremely tough, long lasting 2-pack undercoat for use under Perfection Gloss. |
|
|
|
|
Primers
Ask any boatpainting professional and he'll tell you that you cannot 'work down' to a high quality finish - you have to 'work up' and that means care and attention to preparation of the surface prior to applying topcoats. |
|
|
Schooner - Premium Varnish
Suitable for all internal and external wood, Schooner is a traditional tung-oil based yacht varnish for classic yachts with a beautiful, deep gloss finish. |
|
|
Thinners
International's thinners have been developed to be fully compatible with our product range to enable you to use our products in the most efficient and economical way. |
|
|
Toplac - Premium Gloss
Toplac is a premium high gloss, long lasting marine enamel for all areas above the waterline. It is extremely easy to apply with excellent gloss and colour retention - up to 3 times longer than conventional paints. Toplac is available in a wide range of colours. |
|
|
Trilux Hard Antifouling
New medium performance, hard antifouling suitable for all substrates including aluminium. Offers protection in medium fouling conditions where a hard, scrubbable antifouling is required. |
|
|
VC Offshore Hard Antifouling
VC Offshore is the ultimate high strength antifouling with Teflon®. It dries to a smooth, hard, scrubbable finish, ideal for racing and sailing |
|
|
|
|
|
